BYD Shark 6 Tray Storage Ideas: Tub Organiser Setup for Everyday Gear

The BYD Shark 6 is being used by Australian owners for work, camping, shopping, family duties and everyday driving. Once toolboxes, storage tubs, sports bags, recovery gear and camping equipment are added, the open tray or tub can quickly become difficult to manage.

A bare cargo floor provides plenty of space but very little structure. Boxes can slide, bags can tip and smaller equipment can spread into the corners during braking, turning and rough-road travel.

This guide explores practical BYD Shark 6 tray storage ideas, including removable boxes, tray and tub dividers, floor protection, tub racks and modular organiser layouts.

Start with the usable BYD Shark 6 tray or tub floor

The BYD Shark 6 has its own cargo-floor shape, wheel-arch layout and moulded edges. Accessories designed for another ute model should not be assumed to fit correctly.

Before purchasing a tray mat, divider, rack, storage box or organiser, check:

• The usable floor width between the wheel arches
• The available floor length
• Whether a factory or aftermarket liner is fitted
• Whether tonneau-cover or canopy brackets affect the floor
• Whether factory tie-down points remain accessible
• Whether your storage boxes sit flat within the usable area

Measure the vehicle as it is currently configured rather than relying on dimensions from another ute model.

Check the general Will It Fit My Ute? guide and the dedicated BYD Shark 6 fitment page before ordering.

Why loose gear moves around in the Shark 6

An empty tray or tub is one large open space. Unless the load is contained or restrained, equipment can move whenever the vehicle accelerates, brakes, corners or travels over uneven roads.

Common items affected include:

• Toolboxes and tool bags
• Shopping bags
• Plastic storage tubs
• Camping boxes
• Recovery equipment
• Sports bags
• Buckets and cleaning supplies
• Ratchet straps and smaller tools

A practical setup usually combines storage boxes, defined floor-level zones and suitable load restraint.

For a complete breakdown, read our guide on how to stop gear sliding in a ute tray or tub.

Option 1: Removable storage boxes and tubs

Storage boxes are one of the simplest BYD Shark 6 tray storage ideas.

Instead of allowing smaller items to spread across the cargo floor, group related equipment into labelled boxes.

For example:

• One box for ratchet straps and tie-down equipment
• One box for recovery accessories
• One box for tools and small parts
• One box for camping equipment
• One removable tub for wet or dirty items
• One smaller section for shopping or family gear

Removable boxes make it easier to change the setup between work, family and weekend use.

The limitation is that the boxes themselves can still move across an open floor. Depending on their weight and contents, they may require grip, containment or suitable rated restraint.

For broader layout ideas, read our ute tub storage ideas guide.

Option 2: BYD Shark 6 tray divider or tub divider

A tray or tub divider creates a physical boundary around suitable everyday gear.

Divider-style zones can help separate:

• Toolboxes
• Shopping bags
• Recovery equipment
• Sports gear
• Camping boxes
• Wet or dirty equipment
• Straps and smaller accessories

A fixed divider may suit an owner who carries the same equipment every day. An adjustable divider or removable blocker system is generally more practical when the load changes regularly.

Compare fixed panels, cargo bars, DIY options and modular blockers in our ute divider types comparison guide.

Option 3: Rubber tray or tub mat

A rubber mat may add grip, cushioning and protection against everyday scratches.

It can be useful when basic floor protection is the main priority, but it remains one flat surface and does not create separate storage sections.

Boxes and bags may still move when there is open space around them, especially during sudden braking, cornering or rough-road travel.

Compare rubber mats, liners, drawer systems and modular organisers in our ute tray mat guide.

Option 4: BYD Shark tub rack

A BYD Shark tub rack creates raised carrying space above the tray or tub floor.

Depending on the rack, vehicle and load rating, it may suit compatible:

• Awnings
• Recovery boards
• Bikes
• Long work equipment
• Camping accessories
• Other suitable rack-mounted gear

A rack and a floor-level organiser solve different problems.

The rack carries suitable equipment above the tub. It does not normally create boundaries around toolboxes, shopping bags and camping boxes underneath.

Read our ute tub rack versus modular organiser comparison before deciding which option addresses your main storage problem.

Option 5: Drawer system

Drawers may suit owners who carry a consistent load and need enclosed or potentially lockable compartments.

They can work well for permanent work or touring layouts, but they also involve trade-offs:

• Added vehicle weight
• Higher purchase and installation cost
• Reduced open cargo height
• Less flexibility for larger loads
• More difficult removal

Owners who change regularly between work, family and camping use may prefer removable boxes and adjustable floor-level organisation.

See our guide on organising a ute tray without installing drawers.

Option 6: Modular BYD Shark 6 tub organiser

A modular organiser creates several adjustable positions across the main cargo floor rather than one fixed dividing line.

LockNMat combines heavy-duty interlocking tiles with 12 removable locking blockers. The blockers connect to the floor pattern and can be repositioned around suitable toolboxes, storage tubs, shopping bags, camping boxes and everyday equipment.

The system installs without permanent modification and can be rearranged when the vehicle changes between work, shopping, camping and everyday duties.

Visit the How It Works page to see how the tiles, filler pieces and blockers connect.

BYD Shark tub rack vs modular organiser

BYD Shark 6 storage layouts by use

Work and trade use

• Tailgate zone: Everyday tool bag and frequently used equipment
• One side: Longer tools or materials positioned and restrained safely
• Opposite side: Stackable consumable and small-parts boxes
• Forward zone: Heavy equipment positioned according to loading guidance
• Flexible centre: Open space for changing job materials

For more work-specific ideas, read our tradie ute tray setup guide.

Camping and touring

• Rear-access zone: Cooking gear, chairs and frequently used camp equipment
• Recovery zone: Straps, compressor, gloves and recovery tools kept accessible
• Clean zone: Sleeping gear and clothing in suitable sealed containers
• Dirty zone: Wet straps, muddy shoes and cleaning equipment
• Heavy-equipment zone: Fridge, battery and water positioned and restrained appropriately

See our complete camping and 4WD touring setup guide.

Shopping and family use

• Create a smaller zone near the tailgate for shopping bags
• Use removable boxes for sports and school equipment
• Leave enough open floor space for larger family items
• Reposition the blockers when the cargo changes

Mixed everyday use

• Keep one consistent quick-access area
• Use removable boxes for different activities
• Retain an open section for larger changing loads
• Avoid permanently filling every part of the floor

Consider accessory weight and payload

Every rack, drawer system, toolbox, battery, water container and storage accessory adds to the vehicle’s total load.

Before building a permanent setup:

• Check the vehicle’s payload and axle limits
• Include the weight of every fitted accessory
• Include passengers, fuel, tools, water and camping gear
• Follow the vehicle manufacturer’s loading guidance
• Avoid adding equipment that is not required for how the ute is actually used

A removable system may suit owners who want organisation while keeping the cargo area flexible, but its weight and the carried load must still be included when assessing the vehicle’s total load.

Will LockNMat fit the BYD Shark 6?

The system is designed to fit within the main usable area between the wheel arches. Small side gaps may remain, and on some ute models these can be up to approximately 25 mm per side.

The locking blockers connect to the interlocking floor pattern rather than relying on pressure against the tub walls.

Tub liners, tonneau-cover brackets, canopy hardware, moulded edges and other fitted accessories can affect the available cargo-floor area.

Measure the usable floor and check the dedicated BYD Shark 6 fitment page before ordering.

What comes in a complete LockNMat pack?

Each complete 48-piece pack includes:

• 12 large tiles measuring 360 × 360 mm
• 12 medium filler tiles measuring 360 × 100 mm
• 12 small filler tiles measuring 360 × 50 mm
• 12 locking blockers

The blockers can be repositioned around suitable boxes, tool bags, shopping and camping equipment when the BYD Shark 6 cargo layout changes.

Important load-restraint information

Organising the tray or tub and properly restraining cargo are separate responsibilities.

LockNMat can help organise suitable everyday equipment and reduce ordinary movement. It is not a certified load-restraint system.

Heavy, sharp, dangerous or legally restrained cargo must be secured separately using suitable rated straps, approved anchor points or other appropriate restraint methods.

Always follow:

• The vehicle manufacturer’s loading instructions
• Payload and axle limits
• The accessory manufacturer’s instructions
• Applicable load-restraint and road-safety requirements

BYD Shark 6 tray storage FAQs

What are practical BYD Shark 6 tray storage ideas?

Use removable boxes, create separate positions for work, camping and family equipment, keep frequently used gear near the tailgate and secure heavy cargo appropriately. Adjustable blockers can help define zones around suitable everyday boxes and bags.

Does LockNMat fit the BYD Shark 6?

LockNMat is designed to fit within the main usable floor area between the wheel arches of many dual-cab ute setups, including BYD Shark 6-style layouts. Tub liners and accessories can affect the available area, so measure and check the dedicated fitment guide before ordering.

Should I choose a BYD Shark tub rack or a tub organiser?

Choose a rack when you need appropriately rated raised carrying space. Choose a floor-level organiser when your main problem is everyday boxes and bags moving around inside the cargo area. Some owners may use both when the rack hardware leaves enough usable floor space.

How do I stop gear sliding in a BYD Shark 6 tray?

Contain smaller items inside boxes, create defined floor positions and use suitable rated restraint whenever the load requires it. A modular organiser can help reduce ordinary movement but does not replace load restraint.

Is the BYD Shark 6 tray the same size as a Ford Ranger or HiLux?

No assumption should be made that the tub dimensions or moulded floor shape are identical. Measure the Shark 6 directly rather than purchasing an accessory based only on another vehicle’s dimensions.

Do I need drawers in my BYD Shark 6?

Not always. Drawers may suit a permanent enclosed setup, while removable boxes and an adjustable organiser can preserve more open floor space for changing loads.

Does LockNMat require drilling?

No. LockNMat installs without drilling, glue or screws.

Is LockNMat a load-restraint system?

No. LockNMat is an organisation system for suitable everyday equipment. Heavy, dangerous or legally restrained cargo must be secured separately.

Create a BYD Shark 6 layout that can change

The best storage setup depends on what the vehicle carries most often.

Use boxes to contain smaller equipment, a rack for appropriately rated raised loads and adjustable floor-level zones when the cargo changes between work, camping, shopping and family use.

LockNMat provides a removable interlocking floor and 12 repositionable locking blockers for creating practical zones around suitable everyday gear.

LockNMat helps organise everyday BYD Shark 6 tray and tub gear and reduce ordinary movement. It is not a certified load-restraint system. Heavy, dangerous or legally restrained cargo must always be secured separately using suitable rated equipment.